Description
- Highly flexible allowing for misalignment
- Operating Temperature 15°C-130°C (59°F-266°F)
- Nominal Pipe OD 54mm, 40mm, 34mm
- Imperial Size 2″, 1 ¼”, 1½”
Innovative and versatile EPDM rubber plumbing connections for domestic and commercial use.
For Professional plumbers and D.I.Y. market.
Simple ways to save money, easy to fit and do it yourself!
Compliant with EN 681-2 standards Manufactured in EPDM, [Ethylene Propylene Diene Monomer(M Class)] Rubber.
Benefits
- Highly flexible allowing for misalignment
- Freedom from corrosion
- Ideal for permanent use, emergency and temporary repairs
- Connects imperial to metric pipe
- Reusable over and over again
- No cleaning, drying or gluing needed
- Ease of installation with stainless steel jubilee clip
- Easy to fit and do it yourself. No more mistakes!
- Simple to fit, connect and tighten
- Gives the perfect seal, no more leaks!
- Easy to apply in tight spaces due to flexibility
EPDM Rubber
EPDM Rubber Manufactured in EPDM [Ethylene Propylene Diene Monomer(M Class)] Rubber
- EPDM combines excellent resistance to deterioration due to the effect of ozone, oxygen, weather, heat and many chemicals
- Its serviceable temperature range is -40° F to +250° F and intermittent to + 275° F
- It is not recommended for use in contact with petroleum oils or fluids
- Hardness tolerance for a nominal IRHD value of 60 it ±5
- Tensile strength at least: 9MPa
- Elongation at break %: >300
- Ageing for 7 days at 70° the material must still be within the following property ranges;
- Hardness change max/min:+8/ -5
- Tensile strength drop as a percentage: -20%
- Elongation change as a percentage: 10%/-30%
- Stress Relaxation maximum reduction in % -7 days@70°:
- <15% relaxation of tensile stress -100 days @23%:
- <22% relaxation of tensile stress
- Water Absorption – Volume change in water – Test for 7 days immersion @ 70°C not volume change: Acceptable range is from -1% up to +8% net change in volume.
