FlexiPlumb – 90 Degrees Bend

For Professional plumbers and D.I.Y. market.

Simple ways to save money, easy to fit and do it yourself!

Compliant with EN 681-2 standards Manufactured in EPDM, [Ethylene Propylene Diene Monomer(M Class)] Rubber.

Benefits

• Highly flexible allowing for misalignment
• Freedom from corrosion
• Ideal for permanent use, emergency and temporary repairs
• Connects imperial to metric pipe
• Reusable over and over again
• No cleaning, drying or gluing needed
• Ease of installation with stainless steel jubilee clip
• Easy to fit and do it yourself. No more mistakes!
• Simple to fit, connect and tighten
• Gives the perfect seal, no more leaks!
• Easy to apply in tight spaces due to flexibility

• EPDM Rubber Manufactured in EPDM [Ethylene Propylene Diene Monomer(M Class)] Rubber
  • EPDM combines excellent resistance to deterioration due to the effect of ozone, oxygen, weather, heat and many chemicals
  • Its serviceable temperature range is -40° F to +250° F and intermittent to + 275° F
  • It is not recommended for use in contact with petroleum oils or fluids
  • Hardness tolerance for a nominal IRHD value of 60 it ±5
  • Tensile strength at least: 9MPa
  • Elongation at break %: >300
  • Ageing for 7 days at 70° the material must still be within the following property ranges;
    • Hardness change max/min:+8/ -5
    • Tensile strength drop as a percentage: -20%
    • Elongation change as a percentage: 10%/-30%
  • Stress Relaxation maximum reduction in % -7 days@70°:
  • <15% relaxation of tensile stress -100 days @23%:
  • <22% relaxation of tensile stress
  • Water Absorption – Volume change in water – Test for 7 days immersion @ 70°C not volume change: Acceptable range is from -1% up to +8% net change in volume