|
GreaseShield® GS1850-LL-PF
Approvals
ASME A112.14.3-2000 Testing of Grease Interceptors, ASME A112.14.4-2001 Grease Removal Devices, CSA B481.0-2012 Testing of Grease Interceptors, CSA B481.1-2012 Testing and Rating of Grease Interceptors using Lard, CSA B481.5-2012 Testing and Rating of Grease Interceptors Equipped with a Grease Removal Device & PDI G 101. UL Approved (File No: E361705). Machinery Directive 2006/42/EC and EMC directive 2004/108/EC.
Flow Rates
Passive PDI =7GPM/26.5 L/m
Pro Active= 1.8 L/S
Application
10 / 20 Grid Ovens with Low Level Discharge and Sink. Do not exceed rated inflows.
Functions & Features
- PreFilter
- Genie H2O Heater On Demand System -Supplied as standard (2509P01)
- 24 Volt PLC 4 Way - Controls both main and LL tank operation
- LL Tank Filter built in for LL Inlet - Ensure ovens are plumbed into the LL inlet and sink into the PreFilter inlet
- Solenoid Valve WRAS approved (or similar approval) Solenoid
- Anti-Flood Pump - To maintain normal water level + recalibration feature
- Anti-Flood Sensor included
Parts Supplied as Standard
- Vortex Flow Controller - Fitted as option on normal inlet.
- Running Trap – 54mm Running trap fitted on outlet as standard.
- FlexiPlumb:-54mm Running trap (0635D04-54), 54mm 90° bend (0635P02-54), 40mm 90° bend (0635P02-40) x2, 40mm straight (90635P01), 34mm 90° (0635P02-34)
- 40mm Blanking Cap (0635D10-40) x2
- Key (0509P86)
- Braided Hose For Hot Water (0214P01) x 2 as part of Genie H2O
- Plumbing Pack-see Note
Default Program
(V1.0 1850-LL)
Start 7.00 Am, Stop 02.30 Am. FOG & Auger pulsing 5 Min On 5 min off. An anti-Flood and Recalibration cycle, when water intake is activated FOG roller is inhibited. Mains lead per country.
Installation Kit
- Units must be at floor level or located on drop frame castored stands
- IP56 Socket. Best Practice Management and Do’s and Don'ts, both laminated to be displayed on site.
- Daily Maintenance Logbook (12 months)
- Sampling Point
Ratings |
|
Note
RE: Plumbing Pack Water Spray gun and hose for connection to WRAS approved (or similar approval) connection (or equivalent) for service.
Labelling
- Voltage per country
- Flow Rate per country
- Labels per country
- Labels per Distributor
Average Power Consumption /Hour 23.6 Watts
Notes
- Plumbing Guidelines to be adhered to IAW Installation and Operation Manual.
- All FlexiPlumb to be supplied with jubilee clip fasteners
- VFC= Vortex Flow Controller
UK Installs
AQUACHECK 15DN (WRAS Certified) or equivalent double check valve to be fitted to water supply on ALL GreaseShield® (STD Range Models) to conform with WRAS back flow prevention. |
|